12 TFT display, configurable up to 8 waveforms, enables maximum data visibility for the most critical parameters. Unique digital SPO2 technology can work accurate during motion and low perfusion. Anti AC &high-frequency electrosurgical defibrillators interference. Rich screen layout, standard, large font, trend graph, OxyCRG, ECG full lead and others.Strong data storage: 720 hours trends, 10000 group NIBP, 1024 alarms events. ST analysis, arrhythmia analysis, pacemaker analysis, drug analysis and calculation. Audible & visual alarm available, adjustable. Powerful software function to support use in NICU, ICU, OR, CCU or normal patient room. Optional software upgrading based on USB.
Wired/wireless networking with central monitoring system, up to 64 beds in one group. Built-in 3 trace thermal recorder for printing real-time and historical data. Super long life rechargeable Lithium battery upto 4 hours of working time. Suitable for adult, pediatrics and neonate patients.ECG, NIBP, SPO2, TEMP, RESP, PR, Rechargeable Lithium battery. Full lead: I, II, III, AVL, AVR, AVF and V. Gain: 5mm/mV, 10mm/mV, 15mm/mV, 20mm/mV and 25mm/mV. Scanning speed: Changeable with three grades of 12.5mm/s, 25mm/s and 50mm/s.
Band width: 0.05Hz-100Hz(3dB). Scope: 15 times/minute to 300 times/minutes.Variation of heart beat LORENZE drawing: Analysis on heart beat data for the current 5 minutes with histogram during RR period. Arrhythmia: Twenty kinds of common abnormal ECG can be analyzed, with ECG data of 1000 times of arrhythmia kept and with 10 seconds kept for each time. Accuracy: Error rate < 20%. Cuff gassing time less than 15 seconds. First-time gassing : dynamic state 24kPa180 mmHg. Manual selection: 9.3kPa70 mmHg13.3kPa100 mmHg16.0kPa120 mmHg. 18.6kPa140 mmHg20.0kPa150 mmHg21.3kPa160 mmHg.
Automatic detection period: 1 minute to 240 minutes. Stop size1 min1 min -10min, 5min(10 min -30min), 10min30 m.
In -90min and 30min90 min -240min. Systolic blood presure: 4kPa -34kPa(30mmHg -255mmHg). Diastolic presure 2kPa -29.3kPa(15mmHg -220mmHg). Mean presure 2.7kPa31.3kPa 20mmHg235mmHg. Chest impedance method or concentration of carbon dioxide at end of respiration.
Scope of chest impedance method 0 time/minute 100 minutes/minute. Precision of chest impedance method time/minute. Detection scope of carbon oxygen at end of respiration 3mmHg-75mmHg 0.4%vol-9.9%vol.
Detection scope of respiration rate: 2 times/minute ->60 times/minuteincluding baby. Detection precision of respiration rate: ±1 time/minute. Principle of the CMS50D Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology, the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.
The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc. Integrated with SpO2 probe and processing display module. Small in volumelight in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface. It will automatically power off within 5 seconds if the finger falls out of probe.Various color of cover can be selected. Display ModeOLED display SpO2 Measuring Range0%100%, (the resolution is 1%). PR Measuring Range30bpm250bpm, (the resolution is 1bpm) Accuracy±2bpm or ±2% (select larger). Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger). Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Power Consumptionless than 25mA Voltage: DC 2.6V3.6V Power Supply:1.5V (AAA size) alkaline batteries × 2 Battery working hour: Theoretical number is 20hours. Safety Type:Interior BatteryBF Type.
Sell in standard a hanging rope a user manual. Dimension:57(L) × 31(W) × 32(H) mm Weight:About 50g (without the batteries). The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. Or replace item for you.The item "12-In Ambulance Emergency 6 Paras Patient Monitor Examination Therapy Equipment" is in sale since Monday, July 30, 2018. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Patient Monitors". The seller is "globaltrustshop888" and is located in Walton, Kentucky. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.